Important Safety Instructions - Bowers & Wilkins CT8XO MK2 Installation And Setup Manual

Ct800 series
Table of Contents

Advertisement

Important Safety Instructions

WARNINGS:
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused for
long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have f allen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15 Do not expose this apparatus to dripping or splashing and ensure
that no objects filled with liquids, such as vases, are placed on the
apparatus.
16 To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from the AC receptacle.
17 The mains plug of the power supply cord shall remain readily
operable.
18 When replacement parts are required, be sure the service technician
has used replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorised
substitutions may result in fire, electric shock or other hazards.
19 For continued protection against fire hazard, use fuses only of the
correct type and rating.
20 This product should be operated only from the type of power source
indicated by the marking adjacent to the power cord entry. If you are
not sure of the type of power supply to your home, consult your
product dealer or local power company.
21 Do not overload wall outlets, extension cords or integral convenience
receptacles, as this can result in a risk of fire or electric shock.
22 Never push objects of any kind into this product through openings,
as they may touch dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill liquid of any kind
on the product. Do not place any object containing liquid on top of
the product.
Caution:
To reduce the risk of electric shock, do not dismantle the apparatus and
do not expose the apparatus to rain or moisture. No user-serviceable parts
inside. Refer servicing to qualified personnel.
Explanation of Graphical Symbols
The lightning flash within an equilateral triangle is intended to
alert you to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient
magnitude to constitute an electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
3
3

Advertisement

Table of Contents
loading

Table of Contents