Table of Contents
Advertisement
Conventional RailSounds operations
Experiencing the Conventional Railsounds system
W
ith Conventional RailSounds, you
experience the sounds of real railroad-
ing like never before. Simply put, it's the
most sophisticated, authentic model railroad
sound system in the world.
Be sure to install a 9-volt alkaline battery
in the tender as illustrated in Figure 4. This
ensures interruption-free operation of the
RailSounds sound system.
Bottom of Tender
Remove Screws
Figure 4. RailSounds controls and battery installation
Volume Control Knob
+
-
Rear of Tender
Begin by removing the tender body to
access the battery clip. Remove the three ten-
der body mounting screws and lift the body
shell away. Refer to Figure 4 for the location
of these screws. Snap the battery into the har-
ness, then lower the battery into the holder.
Finish the battery installation by replacing
the tender body and attaching with the three
screws.
7
Battery harness
Battery Clip
Advertisement
Table of Contents
