Front Panel Assembly, Ma-374/375 Board - Sony CCD-TR317 Service Manual

2-2. FRONT PANEL ASSEMBLY, MA-374/375 BOARD

3 Shoe cabinet (N) (97)
(No video light model)
8 Front panel block assembly
(No video light model)
REMOVING THE
VIDEO LIGHT, HALOGEN LAMP
1 Push in the dent
inside hole with
wire tip.
4 Remove in the direction
of the arrow A .
5 Halogen lamp
[MA-374/375 BOARD SERVICE POSITION]
Adjustment remote
commander (RM-95)
MA-374 board (TR model)
MA-375 board (TRV model)
1 Two screws (M2 × 4),
lock ace, p2
2 Claw
3 Shoe cabinet (L)
(Video light model)
(VIDEO LIGHT MODEL)
2 Three claws
3 Video light
A
LANC jack
Front panel block assembly
7 FP-43 flexible
4 Screw
(M2 × 4),
lock ace, p2
8 Front panel block assembly
(Video light model)
REMOVING THE MA-374/375 BOARD,
MICROPHONE, FRONT PANEL (97) ASSEMBLY
3 Three tapping screws (B2 × 5)
4 MA-374 board (TR model)
MA-375 board (TRV model)
2 Microphone (L) (2P)
(Stereo model)
1 Microphone (R)
(2P)
5 Three tapping
screws (B2 × 5)
7 Microphone (R)
CPC-7 jig
(J-6082-382-A)
DC IN
AC POWER
AC IN
ADAPTOR
2-3
board (20P)
5 Two screws
(M2 × 4),
lock ace, p2
6 Remove the three claws
Remove it while taking
care as the FP-43 flexible
cable is connected.
9 Front panel (97)
assembly
8 Microphone (L)
(Stereo model)
6 Microphone
grill (D) assembly
CPC-7 jig
Contacting
surface
REMOVING THE CPC LID (BT)
CN982
Screw driver (–)
CPC lid (BT)
1
16