Msw Codes - Sony CCD-TR317 Service Manual

2-2. MSW codes

• The lower parts of the data of addresses 12, 16 and 1A represent
the MSW codes (mode switch, mechanism position) when
errors occurs.
• The upper parts of the data of addresses 12, 16 and 1A represent,
when the mechanism position is to be moved, the MSW codes
at the start of movement (when moving the loading motor).
• The lower parts of the data of addresses 13, 17 and 1B represent
the MSW codes of the desired movement when the mechanism
position is to be moved.
←
Unloading
Mechanism position EJECT
MSB
MODE SW C
MODE SW B
MODE SW A
Releasing lock of
cassette campartment
Mechanism Position MSW Code
EJECT
BL
USE
LOAD
STOP
TURN
RECP/PB
REW
BL USE BL
LS chassis movement range
Position at which the cassette compartment lock is released. The mechanism will not move any
1
further in the unloading direction.
BLANC code. Between two codes. The mechanism will not be stopped by this code while it is
7
operating.
EJECT completion position. When the cassette is ejected, the mechanism will stop at this
3
position.
2 Code during loading/unloading. Code that is used while the LS chassis is moving.
Normal stop position. The pinch roller separates, the tension regulator returns, and the brakes of
6
both reels turn on.
4 Position at which is used when the pendulum gear swings from S to T or from T to S.
PB, REC, CUE, REV, PAUSE, FF positions.
0
The pinch roller is pressed and tension regulator is on.
REW position. REW are carried at this position.
5
The mechanism will not move any further in the loading direction.
LOAD BL STOP
BL
Pinch roller is detached
Contents
5-60
TURN BL REC/PB
Pinch roller is pressed
→
Loading
BL REW