Using The Remote; Changing Button Assignments - Sony STR-DA1500ES Operating Instructions Manual

Using the Remote
Changing button
assignments
You can change the factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the VIDEO jacks on the receiver,
you can set the VIDEO button on this remote
to control the DVD recorder.
Note
You cannot change the settings ofPHONO, TUNER
and DMPORT buttons.
1
Hold down the input button of
which you want to change the
assignment.
Example: Hold down VIDEO.
2
Referring to the table below,
press the corresponding
button for the category you
want.
Example: Press 3.
Now you can use the VIDEO button to
control the DVD recorder.
Categories and the
corresponding buttons
Categories Press
VCR (command mode VTR 3)
DVD player/DVD recorder
2
(command mode DVD1)a)
DVD recorder 3
(command mode DVD3)a)
CD player 4
Euro Digital Satellite Receiver 5
DVR (Digital CATV terminal) 6
DSS (Digital Satellite Receiver) 7
Blu-ray disc player 8
(command mode BDO b )
BIu-ray disc recorder 9
(command mode BD3)b)
MD deck
OlIO
Tape deck
-1--
a)
Sony DVD recorders are operated with a DVD I or
DVD3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
b)For details on the BDI or BD3 setting, refer to the
operating instructions supplied with the Blu-ray
disc player or Blu-ray disc recorder.
To clear all remote button
assignments
While holding down MASTER VOL -, press
IIC) and ZONE I/C).
The remote is reset to its factory settings.
51
us
•
c
U)
:::J
co
-
= r
(D
:Jl
(D
3
o
-
( D