Sony STR-DA1500ES Operating Instructions Manual page 30

TU.~i~I··.··!:~~~···.·~··.~tat:io,,'·direc.tIY
(DireCI.,:''funing) . . .
:
.-.--::-.-.:;---: .
Enter the frequency of a station directly by
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use FM/AM on the receiver.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
Example
j:
FM
j
02.50 MHz
Select 1 • 0 • 2 • 5
Example 2: AM 1,350 kHz
Select 1 • 3 • 5 • 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
4
Press ENTER or
e.
You can also use MEMORYIENTER on
the receiver.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
30
US
Chaingiidgtbe.AM:itllllilltl.lale..
(Model of area code UC only)
You can change the AM tuning scale to either
9 kHz or 10kHz using the buttons on the
receiver.
1/6
FM/AM
1
Press
116
to turn off the
receiver.
2
While holding down FM/AM,
press
1/6.
3
Change the current AM tuning
scale to 9 kHz (or 10kHz).
To reset the scale to 10kHz (or 9 kHz),
repeat the procedure above.
Note
All preset stations will be erased when you change
the tuning scale.