Sony STR-DA1500ES Operating Instructions Manual page 50

Operating the·receiver froAl
zone 2 .
The following operations are described for
connecting an
IR
repeater and operating the
receiver in zone 2. When an
IR
repeater is not
connected, use this receiver in the main zone.
ZONE
INPUT
ZONE 1/6
,_",..._ MASTER
' 1 1 ' . 1 "
VOL +/_
1
Turn on the main receiver (this
receiver).
2
Turn on the receiver in zone 2.
3
Press ZONE 1/(9.
The zone function is activated.
4
Press ZONE INPUT repeatedly
to select the source you want.
5
Adjust to a suitable volume.
Adjust the volume using the receiver in
zone 2.
To finish the zone 2 operation
Press ZONE
I/C).
50 US
Tip
Even when this receiver is in standby mode (press
I/CJ on the remote to turned off this receiver), the
receiver in zone 2 remains turned on. To turn off all
receivers, press IICJ and AV IICJ on the RM-
AAU056 remote at the same time (SYSTEM
STANDBY).