Toshiba RAS-13SKHP-E Service Manual page 61

No. Part name
‚
Electric parts 1) Follow the procedure
box assembly
2) Remove screw of earth lead attached to the
end plate of the evaporator.
3) Remove the lead wire cover, and remove
connector for the fan motor and connec-
tor for the louver motor from the electric
parts box assembly.
4) Pull out TC sensor from sensor holder of the
evaporator.
5) Disengage the display unit by simply pushing
at the top of the display unit.
6) Remove the fixing screw that secures the
electric parts box assembly, and remove the
assembly.
<How to assemble the electric parts box>
1) Hook the top part of the electric parts box
2) Secure the grounding wire using the fixing
Procedures

.
assembly onto the claws on the back body,
and secure it using the fixing screw.
Now attach the display unit. Connect the
connectors for the fan motor and louver motor.
screw. Insert the TC sensor into the sensor
holder.
* Be absolutely sure to loop the grounding
wire and TC sensor leads once at the
bottom.
Earth Screw
Fixing screw
– 60 –
FILE NO. SVM-07033
Remarks
Electric part
box cover
TC sensor
Fan motor
connector
AC fan motor
connector
Louver motor
connecto