Masterbuilt 20041411 Assembly, Care & Use Manual Warning & Safety Information page 8

ASSEMBLY INSTRUCTIONS
9
H
G
J
D
10
B
13
H
C
F
D
12
7
Carefully reposition grill as shown.
STEP 5.
Place heat insulation washers (H) on base
handle (9) as shown. Insert base handle (9)
into kettle base (2). Secure with aluminum flat
washers (G) lock washers (J) and serrated
2
flange nuts (D).
STEP 6a.
Place heat insulation washers (H) on lid
handle (10) as shown. Insert lid handle (10)
into holes in kettle lid (1). Add lid hook (12)
then aluminum flat washers (F) and secure
with serrated flange nuts (D).
STEP 6b.
Note: Do not over tighten. Damper should
move freely.
Attach air damper (13) to kettle lid (1) using
phillips head screw (B) and hex lock nut (C).
1
Repeat on opposite side for remaining air
damper.
ASSEMBLY INSTRUCTIONS
6
5
H
F
D
1
15
16
2
18
5
7
GRILL IS READY FOR USE
STEP 7.
Place heat insulation washers (H) on ash can
handle (6) as shown. Insert ash can handle (6)
into ash can (5) and secure using aluminum flat
washers (F) and serrated flange nuts (D).
STEP 8.
Insert charcoal lighting grate (18) into
assembled ash can (5) as shown below.
Slide assembled ash can (5) onto guides of
ash can spacer ring (7).
Place charcoal grate (16) inside kettle base (2).
Rest cooking grate (15) on kettle base (2) as
shown.
Place kettle lid (1) onto kettle base (2).
8