Gearcase Specification Chart; Transmission (Main Gearcase) - Polaris Ranger 400 HO Owner's Manual

Gearcases

Gearcase Specification Chart

Gearcase
Main Gearcase
(Transmission)
Front Gearcase

Transmission (Main Gearcase)

Always check and change the transmission oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 48. Maintain the
oil level even with the bottom thread of the fill plug hole.
Refer to the Gearcase Specifications Chart for recommended lubricants,
capacities and torque specifications. See page 100 for the part numbers
of Polaris products.
Oil Check
The fill plug is located at the
rear of the vehicle.
1. Position the vehicle on a
level surface.
2. Remove the fill plug.
3. Check the oil level.
4. Add the recommended
oil as needed.
5. Reinstall the fill plug.
Torque to specification.
Lubricant
Premium AGL
Synthetic
Gearcase Lube
Premium Demand
Drive Hub Fluid
MAINTENANCE
Capacity Fill Plug
Torque
43.6 oz. 14 ft. lbs.
(1290 ml) (19.4 Nm)
9.3 oz. 8-10 ft. lbs.
(275 ml) (11-13.6 Nm
Drain Plug
Torque
14 ft. lbs.
(19.4 Nm)
11 ft. lbs.
(15 Nm)
Fill Plug
59