Oil Check - Polaris Ranger 400 HO Owner's Manual

Polaris ranger 400 ho utv owner's manual
Table of Contents

Advertisement

Engine Oil
Always check and change the oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 48. See page 54 for oil recom-
mendations.

Oil Check

The oil tank is located under
the seat.
1. Position the vehicle on a
level surface. Place the
transmission in PARK.
2. Start the engine and allow
it to idle for 20-30 sec-
onds. Stop the engine.
3. Remove the seat. See page
26.
4. Remove the dipstick. Wipe
it dry with a clean cloth.
5. Reinstall the dipstick.
Screw it in completely.
6. Remove the dipstick. Make
sure that the oil level is in
the safe range. Add oil if
necessary. Do not overfill.
7. Reinstall the dipstick.
MAINTENANCE
Safe Range
Add Oil
Safe
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 ranger 400 ho

Table of Contents