Specifications; Oil Check/Change; Gearcase Specification Chart; Transmission - Polaris RANGER 400 Owner's Manual

Gearcases

Gearcase Specification Chart

Gearcase
Main Gearcase

(Transmission)

Front Gearcase
Transmission (Main Gearcase)
Always check and change the transmission oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 52. Maintain the oil level even with the bottom of the
fill plug hole threads.
Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and
torque specifications. See page 85 for the part numbers of POLARIS products.
Oil Check
The fill plug is located on the rear of the gearcase. A level check/alternate fill plug is located
on the side of the gearcase. Maintain the oil level even with the bottom of the level check/fill
plug hole threads.
1. Position the vehicle
on a level surface.
2. Remove the level
check/fill plug.
Check the oil level.
3. Remove the rear fill
plug and add the
recommended oil as
needed.
4. Reinstall both fill
plugs. Torque to
specification.

Oil Change

The drain plug is located near the bottom of the gearcase.
1. Remove the rear fill plug and the level check/fill plug.
2. Place a drain pan under the gearcase.
3. Remove the drain plug. Allow the oil to drain completely.
4. Clean and reinstall the drain plug. Torque to specification.
5. Add the recommended oil.
6. Reinstall both fill plugs. Torque to specification.
7. Check for leaks. Dispose of used oil properly.
Lubricant
AGL Gearcase Lubricant
& Transmission Fluid
Demand Drive Fluid
Rear Fill
Plug
Fill
Level
Level Check
and Alternate
Fill Plug
Capacity Fill Plug(s)
Torque
34 oz. 12 ft. lbs.
(1000 ml) (16.3 Nm)
9.3 oz. 8-10 ft. lbs.
(275 ml) (11-13.6 Nm
Drain Plug
MAINTENANCE
Drain Plug
Torque
12 ft. lbs.
(16.3 Nm)
11 ft. lbs.
(15 Nm)
59