Polaris Ranger 400 HO Owner's Manual page 25

Polaris ranger 400 ho utv owner's manual
Table of Contents

Advertisement

Switches
Ignition Switch/Light Switch
The ignition switch is a four-position,
key-operated switch. The key can be
removed from the switch when it is in
the OFF position.
OFF
LIGHTS ON
LIGHTS OFF
START
AWD/Differential Lock Switch
The AWD/Differential Switch
has three positions: All Wheel
Drive (AWD), Differential Lock/
Two Wheel Drive (2WD) and Off
(1WD/Turf Mode).
Press the top of the switch to
engage All Wheel Drive (AWD).
See page 45 for AWD operating
instructions.
Move the switch to the center
position to lock the differential
and operate in two wheel drive
(2WD). Press the bottom of the
switch to unlock the differential
and allow the rear drive wheels to
operate independently (1WD). This mode of operation is well suited to
turf driving or when active traction is not needed.
See page 46 for Differential Lock operating instructions.
FEATURES AND CONTROLS
The engine is off. Electrical circuits are off, except Acc,
12V.
Lights are on. Electrical circuits are on. Electrical equip-
ment can be used.
Lights are off. Electrical circuits are on. Electrical equip-
ment can be used.
Turn the key to the START position to engage the electric
starter. Turn the key to the LIGHTS ON position after start-
ing the engine.
AWD/Differential Switch
Ignition Switch
Light Switch
Choke
Knob
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 ranger 400 ho

Table of Contents