Table of Contents
Advertisement
Controls
Avoiding unintentional alarms
The tilt sensor and interior motion sensor can
be deactivated together, for example in the
following situations:
>
In car washes
>
In stacking garages
>
During transport on car-carrying trains,
boats/ships or on a trailer
>
When leaving animals in the vehicle
Switching off tilt alarm sensor and
interior motion sensor
Once the vehicle is locked, press the
button on the remote control again
within approx. 10 seconds.
The indicator lamp lights up briefly and then
begins flashing again. The tilt alarm sensor and
the interior motion sensor are switched off until
the next time the vehicle is unlocked and subse-
quently locked again.
Comfort Access
The concept
It is possible to access the vehicle without actu-
ating the remote control. It is sufficient to have
the remote control with you, for example in your
jacket pocket. The vehicle automatically
detects the remote control in the vicinity or in
the passenger compartment.
Comfort Access supports the following func-
tions:
>
Unlocking/locking the vehicle
>
Convenient closing
>
Unlocking the trunk lid separately
>
Engine starting
Functional requirement
>
There are no external sources of interfer-
ence in the vicinity.
>
The remote control must be outside the
vehicle to lock it.
40
Opening and closing
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
>
The next unlocking and locking cycle is not
possible until after approx. 2 seconds.
>
It is only possible to start the engine if the
remote control is inside the vehicle.
Comparison with ordinary remote
control
The above functions can be controlled by
pressing the remote control buttons or by using
Comfort Access.
If you notice a brief delay while opening or
closing windows, the glass roof or the
convertible top, the system is checking whether
a remote control is inside the vehicle. Please
repeat the opening or closing procedure, if
necessary.<
Unlocking
Grasp the handle on the driver's or front
passenger door completely, arrow 1.
This corresponds to pressing the
Locking
Touch the surface on the door handle, arrow 2,
with your finger for approx. 1 second.
This corresponds to pressing the
button.
To preserve the battery, please make
sure that the ignition and all electrical
consumers are switched off before locking the
vehicle.<
Coupe: convenient closing
Keep pressing the surface, arrow 2, with your
finger.
button.
Advertisement
Table of Contents
