Table of Contents
Advertisement
Mobility
Turn signals, front
PY21W bulb, 21 watts
The turn signal bulb can be changed via a cover
in the wheel arch.
1.
Turn the respective wheel inwards.
2.
Using a coin, turn both locks of the cover all
the way to the left, arrows 1, and remove the
cover.
3.
Turn the bulb holder to the left and remove
it, arrow 2.
4.
Apply gentle pressure to the bulb while
turning it to the left for removal and
replacement.
5.
Insert the bulb holder and lock it by turning
it to the right.
6.
Attach the cover by positioning the bottom
edge first and then turning both locks all the
way to the right.
Side turn signals
W5W bulb, 5 watts
1.
Press the rear edge of the lamp toward the
front with your fingertip, arrow 1 and pivot it
out, arrow 2.
246
Replacing components
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
2.
While simultaneously lifting the retaining
tab, rotate bulb holder to the left and
remove.
3.
Remove lamp and replace it.
To install, insert front end of the lamp and press
into place at the back.
Tail lamps with halogen headlamps
>
Turn signal:
PY21W bulb, 21 watts
>
Backup lamp:
W16W bulb, 16 watts
>
Brake lamps:
P21W bulb, 21 watts
>
Brake Force Display lamp:
H21W bulb, 21 watts
1
Inner brake lamp/tail lamp
2
Outer brake lamp/parking/tail lamp
3
Reflector
4
Lateral reflector
5
Turn signal
6
Backup lamp
7
Brake Force Display lamp/tail lamp
Tail lamps with xenon headlamps
>
Turn signal:
PY21W bulb, 21 watts
>
Backup lamp:
W16W bulb, 16 watts
>
Brake lamps:
P21W bulb, 21 watts
>
Brake Force Display lamp:
H21W bulb, 21 watts
Advertisement
Table of Contents
