Table of Contents
Advertisement
Mobility
2.
Press button 2.
The oil level is checked and the reading
displayed.
Possible displays
1
Oil level OK
2
Oil level is being checked.
This can take about 3 minutes if the car is at
a standstill on a level surface, or about
5 minutes while the car is on the move.
3
Oil level down to minimum:
Add engine oil as soon as possible, but no
more than 1 US quart/1 liter, refer also to
Adding engine oil on page 235.
4
Oil level is too high.
Too much oil will harm the engine.
Have the vehicle checked without
delay.<
5
The oil level sensor is defective.
Do not add engine oil. You can continue
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer
to page 237. Have the system checked as
soon as possible.
234
Engine compartment
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Display via iDrive
1.
"Vehicle Info"
2.
"Vehicle status"
3.
"Engine oil level"
Possible messages
>
"Engine oil level OK"
>
"Measurement not possible at this time."
>
"Measuring engine oil level...":
This can take about 3 minutes if the car is at
a standstill on a level surface and the engine
is running, and about 5 minutes while the
car is moving.
If engine oil was added, it may take up to
30 minutes to obtain an oil level reading.
>
"Engine oil level below minimum. Add 1
quart!"
Add engine oil as soon as possible, but no
more than 1 US quart/1 liter, refer also to
Adding engine oil below.
If the oil level is below the minimum value,
add engine oil immediately to avoid engine
damage.
>
"Engine oil level too high! Have this
checked.":
Advertisement
Table of Contents
