Table of Contents
Advertisement
Navigation
Navigation system
Vehicle equipment
In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. Equipment is also described
that is not available because of, for example,
selected options or country version. This also
applies to safety related functions and systems.
General information
The navigation system can determine the pre-
cise position of the vehicle, with the aid of satel-
lites and vehicle sensors, and can reliably guide
you to every entered destination.
Enter data only with the vehicle station-
ary, and always give priority to the appli-
cable traffic regulations in the event of any con-
tradiction between traffic and road conditions
and the instructions issued by the navigation
system. Failure to take to this precaution can
place you in violation of the law and put vehicle
occupants and other road users in
Accessing navigation system
1.
Press the button.
2.
"Navigation"
The navigation system can also be
accessed directly with the button on the
controller.
132
Navigation system
danger.<
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Navigation data
General information
Navigation data and authorization codes are
available from your BMW center. Navigation
data are stored in the vehicle and can be
updated.
>
Depending on the data volume, a data
update may take several hours.
>
Update data while driving to reduce the
drain on the battery.
>
Only the main functions of the navigation
system are available during updating.
The update is resumed automatically when a
trip is continued after an interruption.
>
You can inquire as to the status of the
update.
>
The data are stored in the vehicle.
>
After the update, the system restarts.
>
The medium that holds the navigation
data can be removed after the update is
completed.
Information about navigation data
1.
"Navigation"
2.
Open "Options".
3.
"Navigation system version":
Information about the data version is
displayed.
Updating the navigation data
Inserting navigation DVD
1.
Insert the navigation DVD into the DVD
player with the labeled side facing up.
2.
Follow the instructions on the Control
Display.
3.
Enter the authorization code of the naviga-
tion DVD and change the DVD if needed.
Advertisement
Table of Contents
