Moving And Storage Instructions; Troubleshooting - DieHard 28.71219 Operator's Manual

14.

MOvINg AND STORAgE INSTRUCTIONS

14.1 Store the charger unplugged, in an upright condition. The AC
cord will still conduct electricity until it is unplugged from
the outlet.
14.2 Store inside, in a dry, cool place.
14.3
Do not store the clips on or around metal, clipped together or
clipped to cables.
14.4 If the charger is moved around the shop or transported to
another location, take care to avoid/prevent damage to the
cords, clips and charger. Failure to do so could result in personal
injury or property damage.
15.

TROUBLEShOOTINg

PROBLEM
Charger will not turn
on when properly
connected, and no
LEDs are lit.
CHECK BATTERY
(red) LED is lit.
POSSIBLE CAUSE
AC outlet is dead.
Poor electrical
connection.
Reverse connections
at battery.
Battery voltage is too
low.
16
REASON/
SOLUTION
Check for an open
fuse or circuit breaker
supplying the AC
outlet.
Check the power cord
and extension cord for
a loose fitting plug.
Unplug the charger
and correct the lead
connections.
This charger has
an automatic start
feature. If the battery
voltage is under 0.2
Volts, the charger will
not detect it and will
not start the charging
process. Have the
battery checked/
replaced.