Grill Assembly; Tools Required - Frigidaire Gallery Series Use & Care Manual

Note: Prior to assembly remove protective film from stainless steel parts
Assembly requires: 4 tools and a Friend

Tools required:

1/4" socket wrench
1/2" socket wrench
adjustable wrench
scissors
Ignitor Attachment
1. Remove the ignitor cap, spring assembly, bat-
tery and lock nut from ignitor. (See Fig. 1)
2. Insert the threaded section of the ignitor into
the U-shaped cut out of the ignitor mounting
bracket. (See Fig. 2)
3. Insert the threaded section of the ignitor
through the hole in the shelf and secure to
shelf using the lock nut. (Use the ignitor
assembly diagrams to determine which
ignitor goes with which shelf.) Tighten
Securely. (See Fig. 3)
4. Re-insert the battery, positive side first, and
spring assembly and attach the ignitor cap.
(See Fig. 4)
5. Repeat above steps for second ignitor
on the Side Burner.
GL51 Ignitor Assembly
Side Burner (Double Wire)

Grill Assembly

Cap
4
Battery
Spring
Locking
Assembly
Cylinder
Nut
Left Shelf (Four Wire)
Fig. 1
Mounting
Bracket
Fig. 2
Fig. 3
Fig. 4
Keyhole