Frigidaire Gallery Series Use & Care Manual page 7

Interior parts installation
1. Check to make sure the bottom Flavor
Grids are correctly installed in the cutouts and
around the ignitors, as they may have shifted
during shipment. (See Fig. 11)
2. Insert the second row of Flavor Grids into
cutouts with triangle ridges facing up.
(See Fig. 12)
3. Install cooking grates on the ledges provided
on the grill to create your cooking surface.
(See. Fig. 13)
4. Place warming shelf on support brackets by
setting it flat across brackets allowing the two
holes to line up with the stops on each
bracket. (See Fig. 14)
Grill Assembly
6
Cutouts
Bottom Flavor Grids
in between burners
Cutouts
Top Flavor Grids
cover burners
Warming Shelf
Fig. 11
Fig. 12
Fig. 13
Fig. 14