Masterbuilt 20071011 Assembly, Care & Use Manual page 10

9
ASSEMBLY
STEP 7
Place wood chip tray (10) in
smoker as shown.
Note: Wood chip tray and wood
chip loader MUST be in place
when using smoker. This
minimizes the chance of fl are ups.
10
STEP 8
Place drip pan (12) inside smoker
below heating element as shown.
Make sure drip pan hole aligns with
hole in bottom of smoker.
12
ASSEMBLY
STEP 9
Slide brackets on back of grease
tray (15) onto tabs on back of
smoker body (1) until grease tray
1
stops.
Note: Wheels will not operate
while grease tray is in place.
Remove grease tray to push/pull
smoker.
15
STEP 10
Insert wood chip loader (11) into
side of smoker as shown.
11
10