Attaching Adaptors To Paper Holder - Sony UP-CX1 Operating Instructions Manual

Attaching adaptors to paper holder

Paper roll widths vary according to the print pack. When
using the print pack 2UPC-C14 or 2UPC-C48PF, attach an
adaptor to the paper holder to compensate for the width
difference.
1
Open the front door.
2
Press the paper holder release button and pull the paper
holder out.
3
Press the latch on top of the paper holder and open the
holder.
4
Adjust the width of the paper holder.
When using the print pack 2UPC-C14 or
2UPC-C48PF
Attach adaptors to both ends of the paper holder.
Memo
Make sure the color of the label on the upper part of the
adaptors matches the color of the label on the paper
holder.
Note
Insert the adaptors firmly and completely into the
paper holder.
When using the print pack 2UPC-C13 or
2UPC-C15
Remove the adaptors from the paper holder.
Note
Store the adaptors in a safe place so as not to lose them.
Loading Paper Roll and Ribbon Cartridge
9