Before Loading The Paper Roll And Ink Ribbon; Loading The Paper Roll And Ink Ribbon; Attaching Adaptors To Paper Holder - Sony UP-CX2 Operating Instructions Manual

• An IC chip is embedded in the black spool. Do not touch
the terminals on the IC chip with your hands or metal
objects, and do not dent, drop, or otherwise apply
shock to the IC chip. Doing so may cause the ink ribbon
to become unusable.
White spool
Black spool
Notes on storage
• Avoid placing where subject to:
– high temperatures
– high humidity or dust
– direct sunlight
• After opening the bag, use the ribbon cartridge and the
paper as soon as possible.
• When storing after partial use, put the ribbon and the
paper back in their bags.
Before Loading the Paper Roll and
Ink Ribbon
Clean the thermal head and rollers regularly, whenever
you load a new paper roll and ink ribbon. For detailed
information on cleaning, see "Cleaning the inside of the
printer" on page 20.
Loading the Paper Roll and Ink
Ribbon
When using the printer for the first time, you must first
load a paper roll and ink ribbon.
Notes
• Always use a designated print pack.
• Always replace the paper roll and ink ribbon together as
a set.

Attaching adaptors to paper holder

Paper roll widths vary according to the print pack. When
using the print pack 2UPC-C54 series or 2UPC-C58 series,
attach an adaptor to the paper holder to compensate for the
width difference.
IC chip
1
Open the front door.
2
Press the paper holder release button and pull the paper
holder out.
3
Press the latch on top of the paper holder and open the
holder.
Loading Paper Roll and Ink Ribbon
9