Daily Alarm Sub Mode; Setting The Daily Alarm(S) - Suunto Observer Instruction Manual

2.3 DAILY ALARM SUB MODE

The Observer allows you to select and enter settings for up to three alarms.
In the TIME mode, press the [SELECT] button twice to enter this sub mode. (After stopwatch)
In the Daily Alarm mode (Fig. 2.7):
a) "ON" or "OFF" (the activation status of an alarm) display in the top field;
b) The alarming time displays in the middle field; and
c) The alarm (1, 2, or 3) displays in the bottom field.
Press the [ON OFF] or the [QUICK] button to toggle between the alarms 1,2, or 3 and view
the settings for each alarm. If any of the alarms is activated, a bell icon displays over the
mode bar.

2.3.1 Setting the Daily Alarm(s)

1. Press the [ON OFF] or the [QUICK] button to select alarm 1,2, or 3.
2. Press the [SELECT] button for 2 seconds. In the top field, the "ON" or "OFF" will begin to
flash.
3. Press either the [ON OFF] or the [QUICK] button to toggle between "ON" and "OFF".
4. At the setting desired, press the [SELECT] button to move to the next settings. They
follow in order hours, minutes. The field you can change is flashing.
5. Press the [ON OFF] button to scroll the value up or the [QUICK] button to scroll down.
6. At the alarm time desired, press the [MODE] button to accept the changes and exit the
setup process. An icon of a bell will appear at the bottom left side on the middle field to signify
an alarm has been activated.
The Alarm setup is complete. To activate up to three alarms, please repeat steps 1-6.
The alarm volume is not adjustable.
16