Veo Velocity Connect User Manual page 34

Connecting to another NetMeeting user using an IP address
To have a direct connection with another user, you must first obtain an IP address. IP addresses
for most dial-up connections will change every time you log on to the Internet. For this reason,
you must get the IP address from the person you are trying to contact each time. You can also
determine your IP address and then send it to the other person who will use NetMeeting to call
you.
To obtain your IP address, first connect to your Internet Service Provider. Then use either Method
A or B to determine your IP address.
Method A:
Start NetMeeting and then click on Help > About Windows NetMeeting. You can see your IP
address here (as shown below).
Method B:
Whether you are using Windows 2000 or XP, click on the Start button > Run > then type:
IPCONFIG
You can send your IP address to the people who are calling or they can send you their IP
address by e-mail or through an Instant Messaging application such as MSN Messenger.
To connect to a person using their IP address, you can enter it into the highlighted area (as
shown below). After you type in the person's IP address, press Enter on your keyboard to
connect.
Page 34 of 44