The Pocket Pc Stops Working - Fujitsu Pocket LOOX 600 Easy Manual

The Pocket PC stops working

If the Pocket PC stops working, this may have the following reasons:
An application programme has caused the malfunction
Ê
Restart the Pocket PC (soft reset).
Or
Ê
Reset the Pocket PC to the delivered state with the General Reset switch.
!
When you reset the Pocket PC to the delivered state, your data are lost!
1
2
i
After approximately 10 seconds a picture appears on the display and a tone sounds.
A26391-K120-Z120-3-7619
2
3
Troubleshooting and tips
Ê
Slide the cover all the way to the right with
the stylus (1) so that the General Reset
switch is accessible.
Ê
Press the General Reset switch to the
left (2) with the stylus: your Pocket PC is
switched off.
Ê
Slide the General Reset switch after a short
waiting time to the right (2): your Pocket PC
will start up after a few seconds.
57