Additional Safety Precautions For Devices With Wireless Lan - Fujitsu Siemens Computers AMILO M Series Easy Manual

Important notes
In addition, the marking is provided with the chemical symbol of the heavy metal decisive for
the classification as a pollutant.
Cd Cadmium
Hg Mercury
Pb Lead
● During installation and before operating the device, please observe the instructions on
environmental conditions in the "Technical data" chapter as well as the instructions in the
"Preparing the notebook for use" chapter.
● Keep this operating manual together with your device.
If you pass on the device to third parties, you should include this manual.
● If you have a device with a wireless LAN, also observe the information in the section

"Additional safety precautions for devices with wireless LAN".

This notebook complies with the relevant safety regulations for data processing equipment. If you
have questions as to whether you can set up the notebook in the intended environment, please
contact your sales point or our hotline/help desk.
Additional safety precautions for devices with wireless LAN
If a wireless LAN component is integrated in your notebook, you must be sure to observe the
following safety precautions when using your notebook:
● The transmitted radio waves can cause an unpleasant humming in hearing aids.
● Switch off the notebook when you are in an aircraft or driving in a car.
● Switch off the radio components on the notebook when you are in a hospital, an operating
room or near a medical electronics system. The transmitted radio waves can impair the
operation of the medical devices.
● Keep the notebook at least 20 cm from a pacemaker, as otherwise the proper operation of the
pacemaker may be impaired by radio waves.
● Do not let the notebook near flammable gases or into hazardous environments (e.g.
paintshops) with radio components switched on, as the transmitted radio waves can cause an
explosion or a fire.
● The range of the radio connection is dependent on environmental and ambient conditions.
● With data traffic via a wireless connection, it is also possible for unauthorised third parties to
receive data.
The company Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television
faults arising from unauthorised changes made to this device. Fujitsu Siemens is, furthermore, not
responsible for replacing and / or exchanging connector cables and devices which have not been
specified by Fujitsu Siemens Computers GmbH. The user is solely responsible for repairing faults
arising from such unauthorised changes made to a device and for replacing and/or exchanging
devices.
4 10600409222, edition 3