Sony XP-SN70 Operating Instructions Manual page 28

Symptom
Playback starts from the
point you stopped. (resume
function)
Rustling noise is heard from
the CD.
During playback of an ATRAC
CD or MP3 CD, the CD does
not rotate but you can hear
the sound normally.
"NO FILE" appears in the
display after u is pressed
or the lid of the CD player is
closed.
When the lid of the CD player
is closed, the CD starts
rotating.
The LCD display becomes
hard to see or slows down.
" " is flashing quickly in
the display, and you cannot
locate the beginning of the
track or the specific point in
the track.
28
Cause and/or corrective actions
c The resume function is working. To start play from the first track,
press and hold u during stop until the first track starts playing, or
open the lid of the CD player. Or remove all power sources, then
insert the batteries or connect the AC power adaptor again.
(pages 10, 12, 23)
c Close the lid of the battery compartment firmly. (page 10)
c The CD player is designed to stop the rotation of an ATRAC CD or
MP3 CD during playback to reduce the power consumption. The
player is not malfunctioning.
c There are no ATRAC3plus/ATRAC3/MP3 files in the CD.
c A CD-RW from which the data has been erased is being used.
c The CD is dirty.
If the problem still persists, disconnect all power sources, then insert
the batteries or connect the AC power adaptor again. (pages 10, 23)
c The CD player is reading the information on the CD. The player is
not malfunctioning.
c You are using your CD player at high temperatures (above 40°C/
104°F) or at low temperatures (below 0°C/32°F). At room
temperature, the display will return to its normal operating
condition.
c The CD player has entered the Bookmark track play. Press
PLAY MODE/
display.
repeatedly until " " disappears from the