2-Sided Mode - Konica Minolta magicolor 4690MF Service Manual

Theory of operation Ver. 1.0 May 2008
4.3.2

2-sided mode

1. The fist side of the original will be read.
2. The exit roller turns backward to feed the original back into the document feeder.
3. The original that has been taken up again from the exit tray is transported up to the
document scanning position by way of the registration roller.
4. As soon as the original reaches the document scanning position, a read sequence
of the second side of the original will be started.
5. The original that has been read is fed into the exit tray via the exit roller. At this time,
the exit rolls are moved away from the exit roller to prevent the leading and trailing
edges of the original from being pinched between the roller and rolls.
6. In order to keep the proper order of the original, the original fed out into the exit tray
is taken up again and transported through the registration roller and exit roller back
into the exit tray.
4. Mechanical operations
A0FDT2C610AA
A0FDT2C611AA
11