Table of Contents
Advertisement
Ringer volume
Press the volume button up (
handset is ringing, press the button up or down to turn the ringer off temporarily.
Changing ringtone and audio settings quickly
1
Press and hold the power button on the top of the handset.
2
Select the desired audio profile.
Selects the [Silent] audio profile. The ringer is turned off.
Selects the [General] audio profile. Your customised ringtone and audio
settings are used (page 38).
Note:
R For details about ringtones and audio settings, see page 38.
Answering a second call (call waiting)
If you receive a second call while you are talking on the phone, the handset will let you know by
sounding a call waiting tone. If caller information is also received, you can confirm the information
on the screen and answer the second call if desired.
Operation varies by phone service provider. Consult your provider for details.
Important:
R You may need to subscribe to your phone service provider's call waiting service in order to
answer a second call. Consult your phone service provider for information about this feature.
1
When you hear the call waiting tone, tap
2
To switch between calls, tap
Caller ID Type II users (for users in Australia)
If you are talking on a call and receive a second call, the current call will be interrupted or
muted for a short time when the call waiting tone sounds. This is normal and is not a fault of the
product.
R The tones are generated by your phone service provider.
Using the call logs
The handset and base unit each log your calls, allowing you to check a record of your calls. The
following symbols are used to indicate each type of call stored in the call logs.
Important:
R Caller ID is required to log missed and answered calls (page 45).
) and down (
) repeatedly to adjust the ringer volume. While the
.
again.
Phone Features
25
Hide quick links:
Advertisement
Table of Contents
