Setting The Tire Circumference - Cateye CC-RD430DW User Manual

Changing the computer settings [Menu screen]
Pressing MENU on the measurement screen changes to the menu screen. Various settings can be changed on
the menu screen.
* After changes are made, be sure to register the setting(s) by pressing the MENU button.
* Leaving the menu screen without any operation for 1 minutes returns to the measurement screen, and chang-
es are not saved.
MENU
Measuring screen Setting the upper
MODE
MENU
Selecting the
measurement unit
MODE
Entering the total
distance
MODE
Setting the tire
display circumference
Searching for
sensor ID
MODE
Setting the clock
From "Selecting the measurement unit"
Setting the upper display
Select the function for the upper display.
Changing the settings
MODE
MENU

Setting the tire circumference

MODE
Manually switch the speed sensor /
* For the tire circumference, see "Tire circumference" (page 5).
Changing the settings
MODE
MODE
MENU
To "Searching for sensor ID"
MODE
(Press & hold)
MODE
Register the
setting
, and enter the circumference size assigned to each sensor.
MODE
↔
(Press & hold)
MODE
* To change only the speed sensor,
select the speed sensor used, and
press MENU to set.
(Press & hold)
MODE
Register the
setting
Move digits
0100 – 3999
(Press & hold)
MODE
7
CC-RD430DW ENG
(Press & hold)
MODE
Increase
the value
MODE