SCOM-100, User guide
5.2 Change user configuration
A user with the user administration privilege can use this
command to edit other user privileges.
0502,id,c1,c2,c3
0502:
id:
c1:
c2:
c3:
5.3 Delete a user
A user with the user administration privilege can use this
command to remove a user from the user list.
0501,id
0501:
id:
5.4 Defining specific alarm recipients
Special commands are available for defining a subset of
the user list as SMS recipients for each alarm.
5.4.1 Set a DI alarm recipient
1102,m,n,id
1102:
m:
45
Command ID
User ID (1-20)
User administration privilege (0 for 'No'
1 for 'Yes')
Device configuration privilege (0 for
'No' 1 for 'Yes')
Alarm SMS recipient (0 for 'No' 1 for
'Yes')
Command ID
User ID (1-20)
Command ID
Module number (0 for SCOM-100 main
unit, 1-8 for DI-42 I/O expansion units)