Table of Contents
Advertisement
SCOM-100, User guide
4. Device operation
4.1 SMS commands
The SCOM-100 unit accepts text SMS commands to
configure operational parameters, control the unit's
operation modes, and control the unit's outputs. Several
commands can be packed in one SMS message.
An SMS command has the following structure:
XXXX,A..A,..,..,Z..Z
XXXX:
A..A, Z..Z:
The comma character (',') is used as a separator in the
command structure. The semicolon character (';') is used
to separate more than one commands packed in a single
SMS.
4.2 Naming the unit
You can specify a unit name for identification purposes.
The unit name will be used in several device's SMS
transmissions and responses. The command to name the
unit is:
0300,My SCOM-100
0300:
My SCOM-100:
Use your mobile phone to edit an SMS containing the
above command. Type in the characters without any
20
Command identification number 0000-
9999
Command parameters
Command ID
Device name
Advertisement
Table of Contents
