SCOM-100, User guide
1701:
P:
Example:
Reducing the total ON duration of program 3 to the half:
1701,3,50
4.4.8 Clearing the digital output configuration
The command clears any output configurations related
with multivibrator or time schedules:
1090,m,n,ID
1090:
m:
n:
35
Command ID
Factor in % (0-100%). The ON duration
of each program sequence is
calculated by multiplicating this factor
with the initial sequence duration.
Command ID
Module number (0 for SCOM-100 main
unit, 1-8 for DI-42 I/O expansion units)
Output number (1-4 for SCOM-100
main unit, 1-2 for DI-42 I/O expansion
units)