Infinite SCOM-100 User Manual page 4

SCOM-100, User guide
4.4.5 Setting a digital output after a delay
4.4.6 Resetting a digital output after a delay
4.4.7 Digital output time based scheduling
4.4.8 Clearing the digital output configuration
4.5 Analog signal alarming
4.5.1 Analog input configuration
4.5.2 Setting alarm message's texts for analog inputs
4.5.3 Clearing the analog input configuration
4.6 Special I/O Functions
4.6.1 ON/OFF and PID control
5. User administration
5.1 Create a new user
5.2 Change user configuration
5.3 Remove a user
5.4 Defining specific alarm recipients
5.4.1 Set a DI alarm recipient
5.4.2 Set an AI alarm recipient
5.4.3 Clear DI alarm recipients
5.4.4 Clear AI alarm recipients
6. Device status & mode controls
6.1 Setting the device status
6.1.1 RUN (Control) command
6.1.2 Monitor command
6.1.3 Stop command
6.2 Controlling the device status
6.3 Setting the device response
6.3.1 Send response SMS
6.3.2 Response format
6.3.3 Merge concurrent alarms
6.4 Setting up a SMS counter
4