SCOM-100, User guide
1252,id,m,n
1252:
id:
m:
n:
The following command clears the digital input function.
1253,id
1253:
id:
Clearing the Function block configuration
The command erases the function block configuration
and frees the function block instance and the respective
I/O.
1260,id
1260:
id:
Note: Analog or digital inputs involved in ON/OFF or PID
control function blocks can be used for alarming,
while involved digital outputs are dedicated to
control and cannot be remotely controlled through
SMS commands.
43
Command ID.
Function block ID (1-4).
Module number (0 for SCOM-100 main
unit, 1-8 for DI-42 I/O expansion units)
DI input number (1-4)
Command ID.
Function block ID (1-4).
Command ID.
Function block ID (1-4).