Mounting The Nt1; The Smr Shock Mount - RODE Microphones NT1 Instruction Manual

Mounting the NT1

10

The SMR shock mount

The NT1 is supplied with
the SMR shock mount.
Featuring suspension based
around the Rycote® Lyre®
system, it is designed to
isolate the microphone from
mechanical noise caused
by vibrations, bumps, and
other low frequency noises
in the recording space.
To mount the NT1, fi rst
remove the threaded ring
from the bottom of the
microphone. From there,
place the microphone in
the mount from above, and
attach the ring underneath
the mount to secure the
microphone in place.
Diagram 1 Mounting the NT1 in the
SMR shock mount