Related Manuals for RODE Microphones NT 1
Summary of Contents for RODE Microphones NT 1
- Page 1 NT 1 Instruction Guide RØDE STUDIO CONDENSER MICROPHONES...
- Page 2 To achieve the best performance, and to obtain a lifetime of service, we urge you to spend a few minutes reading this manual. When we started the NT 1 design project, our goal was to produce a professional recording microphone that was equal to the worlds best; a ‘...
-
Page 3: Specifications
SPECIFICATIONS: Capsule: 1” Pressure Gradient Transducer Frequency Response: 20 Hz –20 kHz Noise: 17dB Sensitivity: 18 mV/Pa Max SPL: 135db Output Impedance: 200 ohm Power Requirement: 48V D.C. Current Consumption: 3.5 mA Weight: 320 gm Features: • Large Capsule with Gold-Plated Membrane. - Page 4 Make sure the power supply you use is a professional unit that is operating correctly. Damage due to connection of the NT 1 to a faulty power supply is not covered by the guarantee. 2. The NT1 comes complete with a Microphone Stand Clip.
- Page 5 Some tips that may be helpful: Condenser microphones do not like moisture! NT 1, like all studio mics should be kept dry at all times. The capsule will be subjected to a lot of moisture in vocal applications, and we strongly suggest the use of a ‘...
-
Page 6: Warranty Service
Warranty Service: All RØDE products are warranted for one year from date of purchase and the warranty card should be used to register that purchase. The warranty covers parts and labour that may be required to repair the microphone during the warranty period.