Garmin GPS 72 Owner's Manual page 35

Naming the Route — the GPS 72 will automatically name the route using the fi rst and
last waypoint names as a reference. To change the Route Name, place the highlight
over the Name fi eld then press ENTER. When you have fi nished, press ENTER to
save the new name.
Editing a Route
To edit a route the unit must be on the Route Page. When editing a route you can
Insert a Waypoint, Remove a Waypoint, Reverse the Route, Delete the Route or choose to
edit the route on the Map Page. To display the Route Edit Options, press the MENU Key.
Route Edit Options
This will display the Map Page with the Route Line active and the Map
Use Map —
Pointer located on the waypoint highlighted on the Route Page. With the map dis-
played, press MENU to display the available options, Review, Remove, Move, and Next.
• 'Review' Route Waypoint —
Map Pointer on the waypoint, then press ENTER. This will display an options menu.
Highlight 'Review', then press ENTER to display the waypoint information.
Inserting a New waypoint —
•
waypoint into a route.
1. Place the Map Pointer on the route leg that you want to insert the new point in,
and the line will turn to a small dashed line. Press ENTER, the Map Pointer will
have "INS" under it. Move the Map Pointer, dragging the Route Line to the location
that you want the new point at, then press ENTER. If the new location is a Map
Feature, the point will be inserted in the leg. If the location is not on a Map Feature,
the New Waypoint Page will be displayed. Press ENTER to save the new waypoint,
then ENTER again to insert the new waypoint in the route.
To review information on a route waypoint, place the
There are two methods that can be used to insert a new
Introduction Reference
Main Menu
Routes
Route Edit Options
33 33