DeLonghi MULTIFUNCTION BUILT-IN OVENS WITH SIDE OPENING DOOR Installation And Service Instructions Use And Care Instructions page 8

FITTING REQUIREMENTS
WARNING: Taking care NOT to lift the oven by the door handle.
The oven must be built-in in a standard module of furniture of 60 cm width and
depth.
It is to be fit up in a module having the clearance as shown in the pictures.
Note: please consider the side opening of the door (either right of left hinged, depen-
dent on model) when installing the oven.
Once installed you should be able to open the oven door to screw the fixing screws
(not supplied - Fig. 9).
FITTING THE OVEN INTO A
BASE
The space available should be of the
dimensions shown in the figure 5.
Arrangements should be made for an
adequate supply of the air to the oven
to avoid overheating (fig. 6).
8
Figure 5
The walls surrounding
the oven must be
made of heat-resistant
material. Both the
veneered plastic and
the adhesive used
must be resistant to
temperatures of 120°C
in order to prevent
unsticking and defor-
mation.
Figure 6
600