Figure 34
Figure 35
32
Figure 33
M
M
1
1
2
REPLACING THE MIDDLE AND
INNER PANES OF GLASS
1. The door should be held still by
one person. A second person
should gently replace the panes
of glass.
2. Replace the middle pane:
• Check that the four rubber pads
are in place (M in fig. 33).
• Check that you are holding the
pane the correct way. You should
be able to read the wording on it
as it faces you.
• Gently insert the top edge of the
pane into the top clamps (arrow 1
in fig. 34), then lower the pane
and insert the bottom edge into
the bottom clamps (arrow 2 in fig.
34); and then slide the pane into
position (fig. 35).