DeLonghi MULTIFUNCTION BUILT-IN OVENS WITH SIDE OPENING DOOR Installation And Service Instructions Use And Care Instructions page 15

To remove the telescopic sliding shelf supports:
– Remove the side racks and the catalytic liners by unscrewing the fixing screws
(Fig. 16).
– Lay down the telescopic sliding shelf support and side racks, with the telescopic
sliding shelf support underneath.
– Find the safety locks. These are the tabs that clip over the wire of the side rack
(arrow 1 in Fig. 17).
– Pull the safety locks away from the wire to release the wire (arrow 2 in Fig. 17).
Cleaning the sliding shelf supports
– Wipe the supports with a damp cloth and a mild detergent only.
– Do not wash them in the dishwasher, immerse them in soapy water, or use oven
cleaner on them.
Figure 16
Figure 17
1
2
1
15