Rear Wheels; Parking Brake; Adjusting The Brake; Hand Brake - Baby Jogger Performance Single Assembly Instructions Manual

Rear Wheels

• To install: Gently slide the wheel's axle into the hole in the axle end until you hear it
click into place.
4
• To remove, simply press the wheel
button while gently sliding the wheel
away from the frame.

Parking Brake

Hand Brake

Small
Ring
Cylinder
Ring
• To use the hand brake feature, simply
squeeze the brake handle.
Warning: Engage
parking device before
loading and unloading
passenger.
• Simply push brake pedal down
to engage rear parking brakes
and lift up to release.

Adjusting the Brake

• If you do not have good braking action,
simply squeeze the brake lever five or six
times. If the problem persists, turn the
cylinder ring clockwise and then turn
the small ring counter clockwise to
tighten the cable. To lock ring, hold the
cylinder ring while turning the small ring
counter clockwise.
NoTe: Engage parking device during the
loading and unloading of passengers.
5