How To Connect - McIntosh HT-5 Owner's Manual

How to Connect

The McIntosh HT-5 Loudspeaker System utilizes binding
posts for speaker wire connections. Refer to figure 3.
1. Connect a loudspeaker cable from the black (negative -)
loudspeaker binding post to the negative or common
output terminal of one channel of the amplifier.
2. Connect a loudspeaker cable from the red (positive Å)
loudspeaker binding post to the positive or 4 ohm out-
put terminal of the same channel of the amplifier.
3. Tighten all of the loudspeaker binding posts.
Right Front Loudspeaker
8
Figure 3
Center Channel Loudspeaker
How to Connect
Speaker Connections
-
+
To Amplifier Terminals
Left Front Loudspeaker