Related Manuals for McIntosh RS150
Summary of Contents for McIntosh RS150
- Page 1 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com RS150 Wireless Loudspeaker System Owner’s Manual Quick Start is on page 4...
-
Page 2: Safety First
(RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without It is a smart idea to read all the enclosed RS150 SAFETY (1) this product may not cause harmful interference, and testing of specific absorption ratio (SAR). -
Page 3: Table Of Contents
Thank you from all of us at McIntosh Dimensions ............14 Safety First .............2 Technical Specifications ........15 Your new RS150 Wireless Loudspeaker System is a FCC Information (For US Customers) ....2 precision instrument that will provide many years of IC Information (Canadian Customers) ....2 enjoyment. -
Page 4: Trademark And License Information
Apple Inc., registered in the U.S. Quick Start (Bluetooth) and other countries. To control this AirPlay 2– enabled speaker, iOS 11.4 or later is required. Here are the basic steps to start enjoying the RS150 The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Wireless Loudspeaker System right away. -
Page 5: More Connections
AirPlay 2 technology lets you play a song on every To Cast to your RS150, you will need: Figure 3– Ethernet connection RS150 in your house at the same time or adjust the • The latest version of Google Home App Note: a solid red Network/Wi-Fi LED indicates that volume in any room –... -
Page 6: Note About Initial Network Connection
Note About Initial Network Connection Settings section of your respective Smart Devices app. When your RS150 connects to your network for the Spotify Connect first time, it will automatically look for the latest software update. If available, the RS150 will install Use your phone, tablet or computer as a remote the newest version. -
Page 7: Front View Labeled
Front View Labeled Installing the Grille The RS150’s Grille can be installed by lining up the eight plastic pegs on the back of the Grille with the eight holes framing the speakers of the RS150. Gently push with even pressure to install and pull straight away from the front to remove the Grille. -
Page 8: The Knobs And Leds On The Front
Enter Bluetooth Press and Hold for two Unmute/Play Short press (less than half The LED will glow red when the RS150 is Discovery Mode seconds a second) or rotate in either connected to a live AC outlet and the unit is in... -
Page 9: Rear View Labeled
The Ethernet Port connects your RS150 to your network’s router using a standard CAT5, CAT5E or CAT6 cable with an RJ45 connector. Using a wired connection is one way to access the RS150’s setup via a browser. For more information, see “The Browser Interface” on page 10. -
Page 10: The Browser Interface
Enter the router’s Username and password. (The default can be found in the router’s documentation, but changing it is a good security rule) • Look for the RS150 in the list of wired or wireless Figure 7– OVERVIEW submenu clients for your router OVERVIEW Menu SETTINGS Menu •... -
Page 11: Figure 8- Settings Submenu
Enter the Network Password for that Network • Select Connect If the Power Sleep Timer is set to OFF, the RS150 The Startup Volume Limit has two settings: DHCP can be set to ON (Default) or OFF. If you will power off into a sleep state after 30 minutes of •... -
Page 12: Update Menu
To restore Factory settings, select the “Start Factory purposes by a McIntosh qualified technician only. Reset” button. Done. Note that you will lose your While the RS150 is in the process of updating the Wi-Fi settings. firmware, the power status LED will blink twice... -
Page 13: Re-Packing The Rs150
Re-packing the RS150 When shipping the RS150, it is highly recommended that the unit be packed as it was originally shipped to avoid damage. Failure to properly pack the unit will likely result in damage. If you need any of the packing material, you can contact McIntosh Customer Service. -
Page 14: Dimensions
Dimensions 7.68” 19.5cm 14.37” 36.5cm VOLUME OUTPUT LEVEL PUSH PUSH BT PAIR POWER / MUTE R S 1 5 0 8.62” 21.9cm 8.9” Figure 11– Dimensions 22.6cm... -
Page 15: Technical Specifications
Technical Specifications Weight 18.5 pounds (8.4kg) net Power Output 24.0 pounds (10.9kg) in shipping carton 120W: 30W Tweeter, 90W Woofer Speakers One 20mm Titanium Dome Fluid-filled Tweeter One 5-1/4 inch Long Throw Woofer Crossover Frequencies 2,000Hz Overall Frequency Range 48Hz to 20,000Hz Streaming Support Apple AirPlay 2, Google Chromecast, Spotify Connect, Tidal Connect, Roon... - Page 16 The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. The RS150 is designed to employ non-McIntosh-provided services some of which require separate customer subscriptions and some of which do not, as part of the Product’s functionality.