Canon DC410 Instruction Manual page 81

Dvd camcorder
Hide thumbs Also See for DC410:
Table of Contents

Advertisement

Battery Pack
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might
explode).
• Do not expose the battery pack to
temperature higher than 60 DC
(140 OF). Do not leave it near a heater
or inside a car in hot weather.
• Do not try to disassemble or modify it.
• Do not drop it or subject it to shocks.
• Do not get it wet.
CAUTION:
Danger of explosion if battery is
incorrectly attached. Attach only
with the same type.
• Attach the terminal cover whenever a
battery pack is not in use. Contact
with metallic objects may cause a
short circuit and damage the battery
pack.
• Dirty terminals may cause a poor
contact between the battery pack and
the camcorder. Wipe the terminals
with a soft cloth.
Long-term storage
• Store battery packs in a dry place at
temperatures no higher than 30 DC
(86 OF).
• To extend the battery life of the battery
pack, discharge it completely before
storing it.
• Charge and discharge all your battery
packs fully at least once a year.
About the battery terminal cover
The battery terminal cover has a
[0]-
shaped hole. This is useful when you
wish to differentiate between charged
and uncharged battery packs.
Back side of the battery pack
Terminal cover attached
D "
r-l
~
Charged
Uncharged
Mini DVD Disc
The recording surface of DVD discs is
extremely delicate. If handled or stored
in an incorrect manner, the camcorder
may stop recognizing or may not be
able to play back the disc. Be sure to
observe the following precautions when
storing/handling your discs.
• Always remove the disc from the
camcorder after you finish
recording.
Do not store the camcorder with a
disc left inside.
• Keep the disc clean of dust, dirt or
smudges. Even very small smudges or
particles of dust can lead to problems
when recording or playing back the
disc. Carefully inspect the recording
surface of the disc before inserting it
in the camcorder. If the disc gets dirty
use a dry, soft lens-cleaning cloth to
remove any fingerprints, dirt buildup
or smudges from the disc surface.
Clean the disc in a radial motion from
its center outwards.
• Never use a chemically treated cloth
or flammable solvents such as paint
thinner to clean the disc.
• Do not bend, scratch or wet the disc
and do not subject it to strong shocks.
Additional Information • 81
I

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc420

Table of Contents