WEISS Vesta Owner's Manual page 21

OWNERS MANUAL FOR WEISS VESTA FIREWIRE INTERFACE
Software installation
Perform the following installation procedure before connecting the VESTA to the computer. The necessary files are supplied on
the enclosed drivers CD.
Windows:
0. Do not connect the device.
1. Double click "WeissFirewireInstaller.exe"
2. Click "Next"
3. Select the directory where you'd like to install the tools. Usually you can use the default values and click "Next"
4. Select if you'd like to create a desktop icon. "Next"
5. Click "Install"
6. You will be asked if you'd like to continue the installation because the driver/software didn't pass the Windows-Logo-Test.
Select "Continue".
7. Select "Yes, restart the computer now" and click "Finish"
Mac:
0. Mount the WeissFirewire.dmg diskimage by double clicking it
1. From the mounted drive double click WeissFirewire-3.3.1.2228.pkg (the version numbers can be different of course)
2. Click "Continue"
3. Select the drive (usually you leave it at the defaults)
4. Click "Continue"
5. Click "Upgrade" or "Install"
6. You'll be asked to login as administrator
7. Confirm "Continue Installation" when warned that the computer requires a reboot after install.
8. Click Restart
After installing the drivers, connect the VESTA to the computer and connect the power cord to the VESTA. The VESTA should
now be recognized automatically. In Windows tell the installation window that you do not want to check the Microsoft website for
drivers and then let the drivers be installed automatically. Ignore warnings concerning "Windows Logo Test" and continue the
installation until completed.
21
Page: Date: 10/08 /dw