Page 1
HL 1610 S HL 1810 S HL 1910 E HL 2010 E HG 2310 LCD HG 2510 ESD...
Page 2
English IMPORTANT SAFETY INSTRUCTIONS READ THESE INSTRUCTIONS UL WARNING: Read this instruction book before using. To reduce risk of fire or electric shock, do not expose to rain or moisture. Store indoors. Double insulated. When servicing, use only identical replacement parts. When using electric tools, basic safety precautions should always be followed to reduce risk of fire, electric shock and personal injury.
Page 3
English 18. Always unplug after use. 19. WARNING: Extreme care should be taken when stripping paint. The peelings, residue and vapors of paint may contain lead, which is poisonous. Any pre-1977 paint may contain lead and paint applied to homes prior to 1950 is likely to contain lead. Once deposited on sur- faces, hand to mouth contact can result in the ingestion of lead.
Page 4
English Double Insulated Tools Tools marked with the words “Double Insulated” are equipped with a two prong plug. These tools have a special insulation system that complies with applicable UL standards . They do not require grounding. ”Double Insulated” tools, like this one, have two prong cords and can use either a two or three prong extension cord.
English Thank you for deciding to choose a STEINEL drying, shrink-fitting, stripping paint Used in the proper manner, this heat gun. This tool can be used etc. All STEINEL tools are manu- heat gun will give you lasting for completing a wide range of factured to the highest standards satisfaction.
Page 6
2 settings. Stage 1 reaches 575 °F at an air flow of 8.5 cf/min, stage 2 reaches 950 °F at 14.8 cf/min. HL 1810 S The tool is switched ON and OFF at the three-stage switch on the back of the grip handle. Airflow and temperature can be adjusted to 3 settings.
Page 7
English Features - Getting started HG 2310 LCD / HG 2510 ESD Operation The tool is switched ON and OFF temperature on a test piece first. When using the heat gun in the at the multi-stage switch on the Using the attachable accessory self-resting position, make sure it back of the grip handle.
Page 8
Applications Here are some of the applications F Soft soldering: First, clean H De-soldering: Circuit boards you can use STEINEL heat guns metal parts you want to join. Then, and other electronic components for. This selection is by no means...
Page 9
English HL 1610 S / HL 1810 S / HL 1910 E / HL 2010 E / HG 2310 LCD / HG 2510 ESD 920 - 1100 °F 480 - 920 °F 480 - 580 °F 480 - 580 °F 1100 °F...
Page 10
English Tool elements / spare parts list HG 2310 LCD Spare Parts List HL 1610 S Part No. Pos. HL 1610 S, Type 3480 Housing Set incl. Labels 02816 Switch with Markings (external) 02416 Power Cord with Strain Relief 02723 Power Cord Connector —...
Page 11
English Spare Parts List HL 1810 S Pos. Part No. HL 1810 S, Type 3481 Housing Set incl. Labels 1 +2 02818 End Cap — Switch with Markings (external) 02420 Softgrip 02621 Outlet Protection Tube 02523 Rubber Soft Stand 02629...
Page 12
English Spare Parts List HL 1910 E Part No. Pos. HL 1910 E, Type 3484 Housing Set incl. Labels 1 + 2 02819 Switch with Markings (external) 02420 Softgrip 02621 Rubber Soft Stand 02629 Power Cord with Strain Relief 6 + 8 02723 Outlet Protection Tube 02523...
Page 13
English Spare Parts List HL 2010 E Pos. Part No. HL 2010 E, Type 3482 Housing Set incl. Labels 1 + 2 02820 Switch with Markings (external) 02420 Softgrip 02621 Rubber Soft Stand 02629 Power Cord with Strain Relief 6 + 8 02723 Outlet Protection Tube 02523...
Page 14
English Spare Parts List HG 2310 LCD Pos. Part No. HG 2310 LCD, Type 3483 Housing Set incl . Labels 1 + 2 02823 Switch with Markings (external) 02423 Softgrip 02621 Rubber Soft Stand 02629 Power Cord with Strain Relief 6 + 8 02723 Outlet Protection Tube...
Page 15
English Spare Parts List HG 2510 ESD Part No. Pos. HG 2510 ESD, Type 3488 Housing Set incl. Labels (ESD) 1 + 2 02825 Switch with Markings (external) 02425 Softgrip 02621 Rubber Soft Stand 02629 Power Cord with Strain Relief (ESD) 6 + 8 02725 Outlet Protection Tube (ESD)
These are hand held power tools and are intended for use as such. Any other use voids STEINEL’s warranty. Warranty and Repair Procedures In the event of product failure, please call STEINEL customer service directly at (800) 852-4343.
Page 17
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. STEINEL 9051 Lyndale Avenue South Bloomington, MN 55420 Tel.: 952-888-5950 Fax: 952-888-5132 Toll free: 1-800-852-4343 E-mail: sales@steinel.net Visit our website: www.steinel.net - 17 -...
Need help?
Do you have a question about the HL 1810 S and is the answer not in the manual?
Questions and answers