Throttle Freeplay Adjustment - Polaris Ranger 800 HD Owner's Manual

Throttle System
Throttle Body/Idle RPM
Idle RPM is preset by the manufacturer. If the engine idle speed is not
satisfactory, please see your POLARIS dealer for adjustment.

Throttle Freeplay Adjustment

1. Remove the seat.
2. Locate the throttle cable adjuster.
3. Squeeze the end of the rubber boot
and slide it far enough to expose the
end of the inline cable adjuster.
4. Loosen the adjuster lock nut.
5. Rotate the boot to turn the adjuster
until 1/16" to 1/8" (1.5-3 mm) of
freeplay is achieved at the throttle
pedal. See page 82.
Tip: While adjusting, lightly flip the throttle
pedal up and down.
6. Tighten the lock nut.
7. Squeeze the end of the rubber boot
and slide it over the cable adjuster to its original position.
MAINTENANCE
Boot
Lock Nut
Adjuster
83