Indicator Lamps - Polaris Ranger 800 HD Owner's Manual

Instrument Cluster
High water pressure may
damage components. Wash
the vehicle by hand or with a
garden hose using mild soap.
Do not use alcohol to clean
the instrument cluster. Do not
allow insect sprays to contact
the lens.
Speedometer
The speedometer displays
vehicle speed in either miles
per hour (MPH) or kilometers
per hour (km/h). See page 36.

Indicator Lamps

Lamp Indicates
Vehicle
Speed
Over
Temperature
EPS Warning This indicator illuminates briefly when the key is
Neutral
High Beam
Helmet/Seat
Belt
Check Engine This indicator appears if an EFI-related fault occurs.
FEATURES AND CONTROLS
Speedometer
Rider Information
When standard mode is selected, speed displays in
miles per hour.
When metric mode is selected, speed displays in
kilometers per hour.
This lamp illuminates to indicate an overheated
engine. If the indicator flashes, the overheating
condition remains, and the system will automatically
reduce engine power.
turned to the ON position. If the light remains on, the
EPS system is inoperative. See your authorized
POLARIS dealer for service.
This lamp illuminates when the transmission is in
neutral and the ignition key is in the ON position.
This lamp illuminates when the headlamp switch is
set to high beam.
This lamp flashes for several seconds when the key is
turned to the ON position. The lamp is a reminder to
the operator to ensure all riders are wearing helmets
and seat belts before operating.
Do not operate the vehicle if this warning appears.
Serious engine damage could result. See your dealer.
Center
Condition
Indicator
Lamps
MODE
Button
33